| |
|
ATEQ
Solo leak tester, with mechanical pressure regulator 4.5 to 130 PSI, or 0.2 to 7 PSI, or 3 to 58 PSI, or vacuum -11.5 to -0.3 PSI
|
|
A
microprocessor controlled, leak detection instrument, based
on gauge pressure decay principle.
|
|
ATEQ Solo, QUALITY LEAK TESTING ON A BUDGET
STANDARD FEATURES:
-
Steel table top enclosure. fits in 10''W x 6''H x 11'' Deep
13 Lbs.
|
|
 |
|
_4 line blue VFD display
- A complete pneumatic system, consisting of a 5u end line
input air filter, a pressure or vacuum regulator and a fill/dump valve block.
_4 different set of parameters for 4 different size parts testing
- A piezzo
resistive transducer board to monitor test pressure and pressure
decay, with up to 1 Pa (0.000145PSI) display resolution.
Adjustable test times, in increments of
0.1 second.
- 4 dedicated
Dry contact inputs (start , reset,
program selection 1 to 4)
- 4 dedicated
dry contact outputs - (Pass,
Fail, Alarm, End of cycle)
- The
user friendly front panel displays real time test pressure
and test results. Red and green lights confirm a clear Pass
or Fail signal. Programming is performed by an operator on the front
panel keypad .
- Up to
4different programs (set of test parameters).
- Upper and lower test pressure limits
- Test results in cc/min.,cc/h,custom units
- Key lock to avoid tampering with set parameters.
- RS232 connector to download test results
- Up to 4 chained (sequenced) programs.
- Programmable back pressure based Passage / blockage test
- fast test feature ATR
_delivered in standard with built in 110v 60hz power supply , (220v 50hz or 24vdc optional)/font>
The Solo
comes with a user manual on CD, one 4 Ft long power cord for 110V connection
, one set of keys, and our manufacturer's certificate of calibration
to recognized traceable to international standards. Manufactured in the USA.
An industrial leak testing instrument made affordable, for your production line leak test.
|
| |
****
PURCHASE THIS GAUGE PRESSURE DECAY or VACUUM DECAY LEAK TEST INSTRUMENT ONLINE (Delivery in 4 weeks)
1 Solo 3-58 PSI, 10Pa display resolution, 5000Pa pressure drop range
leak tester: US$ 3490
1 Solo .3-7 PSI, 1 Pa display resolution, 500pa pressure drop range
leak tester: US$ 3490
1 Solo 4.5-130PSI, 10Pa display resolution, 5000pa pressure drop range
leak tester: US$ 3490
1 Solo test vacuum -0.3 to -11.5 PSI, 1Pa display resolution, 500 pa vacuum drop range
leak tester: US$ 3490
Solos are also available in industrial case and with electronic regulators please contact us for those
| |
