Quick sealing connectors are used to very easily seal on test parts which have smooth cylindrical connections. You can seal on the internal (ID)or the external diameters (OD) of your part. These quick couplers can be triggered either semi automatic (SIM or SAM) with a press to release button or they can be actuated manually with a cam pressed seal (MSI,MSA) or they can be triggered automatically by your leak or flow test ATEQ instrument equipped with the "auto connector" option (SI or SA)..
Important note: all seals even manually operated can be subject to slipping from oil or water presence, line pressure drop, wear or other factors. They need to be attached properly to a fixture, a machine frame, a chain or other suitable device in order to prevent any injury to an operator..
Manual release Cam operated seals:
_ to be used between full vacuum and positive 1 bar gauge.
_Body steel with nickel Chrome plating.
_seal material: Polyurethene
_approximate life of seal::1000 cycles
Air operated seals :
_test pressure from full vacuum to 3 bar gauge (43.5 PSIG), up to 10 bar gauge (145 PSIG) when held in place with a pneumatic cylinder.
_pilot pressure from 4 to 5 bar gauge (58 to 72.5 PSIG)
_Body material: black anodized aluminum.
_approximate life of seal: 3000 cycles.
If you are interested in these quick seal/release seals, please contact ATEQ USA, Canton Michigan, at 1 (734) 838 3100. Credit cards accepted. Return to US home page |